Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2006 >> LR3 Base >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - V6 4.0L Petrol >> Electronic Engine Controls - V6 4.0L Petrol >> Specifications

Electronic Engine Controls - V6 4.0L Petrol: Specifications

LUBRICANTS

Item Land Rover Part No.
(1) HO2s removal STC 50545
HO2s threads Apply suitable high temperature anti-seize compound to threads of sensor
(1) Apply to area around sensor threads prior to attempting to remove sensor
ENGINE MANAGEMENT SYSTEM

Item Description
Engine management system:   
Make Siemens
Type PAG EMS - Generation 1
TORQUE SPECIFICATIONS

Description Nm lb-ft
Intake manifold tuning (IMT) valve bolts 10 7
(1) Heated oxygen sensor (HO2S) 45 33
(2) RH catalytic converter to exhaust manifold bolts 22 16
(2) LH catalytic converter to exhaust manifold bolts 22 16
LH catalyst monitor sensor 45 33
Heat shield bolts 10 7
Mass air flow (MAF) sensor Torx screws 2 1.5
(3) Camshaft position (CMP) sensor bolt 6 4
Engine coolant temperature (ECT) sensor 18 13
Throttle body bolts 10 7
Crankshaft position (CKP) sensor Torx screw 8 6
Knock sensor (KS) bolt 20 15
(1) Apply anti-seize lubricant to threads of sensor - See Lubricants 
(2) New bolts must be fitted
(3) Apply clean engine oil to a new CMP sensor O-ring seal.
scientia non olet · About Mike's Workshop Manuals