Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2006 >> LR3 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - V6 4.0L Petrol >> Electronic Engine Controls - V6 4.0L Petrol >> Removal And Installation >> Engine Control Module (ECM) >> Installation

Engine Control Module (ECM): Installation

  1. Install the ECM.
    • Install the ECM cover and secure with Torx screws.
    • Install the ECM upper cover.
  2. Connect the ECM electrical connectors.
  3. Connect the 2 electrical connectors disconnected for access.
  4. Install the four-wheel drive control module.

    For additional information, refer to: Four-Wheel Drive (4WD) Control Module information.

  5. Connect the battery ground cable.

    For additional information, refer to: Specification information.

  6. Connect T4 to calibrate a new ECM.
scientia non olet · About Mike's Workshop Manuals