Controller Area Network (Can) System: Conditions
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2004 Land Rover Discovery, 2003 Land Rover Discovery, 2002 Land Rover Range Rover, 2002 Land Rover Discovery, and 2001 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
Conditions The CAN system is used by the EAT ECU and the ECM for transmission of the following information:
- Gearshift torque control information.
- EAT OBD information.
- MIL request.
- Vehicle speed signal.
- Engine temperature.
- Engine torque and speed.
- Gear selected.
- Gear change information.
- Altitude adaptation factor.
- Air intake temperature.
- Throttle angle/pedal position.