Cruise Control Activation: Notes
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2004 Land Rover Discovery, 2003 Land Rover Discovery, 2002 Land Rover Range Rover, 2002 Land Rover Discovery, and 2001 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
Cruise control is a passive system. The driver must activate it. Switching on the cruise control master switch located on the instrument panel activates cruise control. An LED in the switch illuminates, indicating cruise control is available. The driver must accelerate the vehicle to the desired speed using the accelerator pedal. When the desired speed is reached, pressing the SET+ switch activates cruise control.
Cruise control will only activate if the following conditions are met:
- Vehicle speed is between 28-125 mph (45-200 km/h).
- The brake pedal is not pressed.
- The clutch pedal is not pressed (manual gearbox only).
- The gearbox is not in park, reverse or neutral (automatic gearbox only).