Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2002 >> Range Rover >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Fuel Delivery System) >> Removal & Installation >> Cover - Tank Module - LH >> Installation

Cover - Tank Module - LH: Installation

WARNING: This page is about a different car, the 2005 Land Rover Range Rover, 2004 Land Rover Range Rover, and 2003 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean area surrounding fuel tank access.
  2. Clean fuel tank access plug and fit new tank seal.
  3. Position fuel tank access plug, align timing and push fully home. Ensure seal is correctly fitted.
  4. Using LRT-19-009, fit locking ring and tighten to 35 Nm (26 ft. lbs).
  5. Fit carpet.
  6. Position spare wheel release straps fit bolts and tighten to 25 Nm (18 ft. lbs).
  7. Fit "D" post trim casings. See 76.13.31 TRIM FINISHER -- 'D' POST -- LOWER .
  8. Connect battery earth lead.
scientia non olet · About Mike's Workshop Manuals