On-board Monitor
WARNING: This page is about a different car, the 2005 Land Rover Range Rover, 2004 Land Rover Range Rover, 2003 Land Rover Range Rover, and 2002 Land Rover Range Rover. However, it is still accessible from the selected car via links, so may be relevant.
Selecting the 'On-board monitor' option displays the 'On-board monitor version' screen as follows.
- SW level
- HW level
- DIAG index
- Bus index
- Encoding index
- Supplier.
If version is selected the 'ON BOARD MONITOR VERSION' screen will be displayed as described above.
- Version
- Key function
- Brightness- the screen brightness can be adjusted by selecting this option.
Select the 'Key function' menu by rotating the LH rotary control and depressing it. The 'ON-BOARD MONITOR KEY FUNCTION' screen will be displayed. This allows each key on the display unit to be checked for operation. The screen also shows the following information:
- Key, the screen will show FF if no keys are pressed or FEH if several keys are pressed. The KEY box will change to reflect the button that has been pressed
- OBM increm sensor- The 'OBM increm sensor' box changes its value as the RH rotary control is turned
- Radio increment sensor- The 'OBM increm sensor' box changes its value when the LH (audio) rotary control is turned.