Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2002 >> Discovery Series II SD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Removal & Installation >> Removal & Installation >> Engine Control Module (ECM) >> Installation

Engine Control Module (ECM): Installation

  1. Position new ECM and connect multiplugs.
  2. Fit ECM and secure with nuts.
  3. Fit lower trim panel to "A" post and secure with fixings.
  4. Fit diagnostic socket to closing panel, fit closing panel and secure with fixings.
  5. Connect battery earth lead.
  6. Fit battery cover and secure with fixings.
  7. Program ECM and reset adaptions using Textbook/T4.
scientia non olet · About Mike's Workshop Manuals