Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Land Rover >> 2002 >> Discovery Series II SD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation >> Torque Specifications

Torque Specifications

TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Coolant Rail Mounting Bolt 16 (22)
Cylinder Block Drain Plug (1) 22 (30)
Fuel Feed Pipe Fitting 12 (16)
Fuel Filter Fittings (2) 15 (20)
Fuel Pump Lock Ring 26 (35)
Fuel Temperature Sensor 13 (17)
Generator Mounting Bolts 33 (45)
Heated Oxygen Sensor
Front HO2S 33 (45)
Rear HO2S 15 (20)
Intake Manifold Bolt 16 (22)
Knock Sensor 16 (22)
Plenum Chamber-To-Ram Housing Bolt 18 (24)
Ram Housing-To-Manifold Bolt 18 (24)
SAI Air Injection Pipe Unions 18 (24)
Third Row Seat Belt Mounting Bolt 37 (50)
Third Row Seat Mounting Nuts & Bolts 16 (22)
INCH Lbs. (N.m) 
Camshaft Position (CMP) Sensor Bolt 71 (8)
Crankshaft Position (CKP) Sensor Bolt 53 (6)
ECT Sensor 89 (10)
Fuel Pressure Regulator Screw 89 (10)
Fuel Rail Bolts 80 (9)
Idle Air Control Valve Clamp Screw 71 (8)
Ignition Coil Bracket Bolt 71 (8)
Intake Air Temperature Sensor 71 (8)
Radiator Drain Plug 53 (6)
Secondary Air Injection (SAI)
Control Valve-To-Engine Manifold Bracket Bolts 89 (10)
Air Pump-To-Mounting 89 (10)
Vacuum Reservoir-To-Mounting Bracket Bolt 89 (10)
Throttle Bracket Bolt 71 (8)
Throttle Position Sensor Screw 18 (2)
(1) Specification is for Discovery Series II. Specification for Range Rover is not available.
(2) Specification applies to Range Rover. Discovery Series II does not have an external in-line fuel filter.