| DTC Strategy |
|
- Poor connector connection
- Restricted intake or exhaust system
- Vacuum leaks
- Faulty throttle body
|
| Enable Conditions |
- Accel pedal value is 0% and vehicle speed is 0 km/h and no gear switch transition and than more than 5s
- Catalyst heating is active
- Engine coolant temperature at engine start is between -10°C (14°F) to 35°C (95°F)
- 6s after engine start
- Vehicle speed less than 3 km/h (1.9 mph)
- Accel pedal value less than 0.01%
- Battery voltage higher than 11V
- Engine coolant temperature higher than -10°C (14°F)
|
| Threshold Value |
- Different between target RPM and actual RPM is higher than 270 RPM and idle torque controller is higher than 30Nm
- Different between actual RPM and target RPM is higher than 200 RPM and idle torque controller is lower than 20Nm
|
| Diagnostic Time |
|
| MIL ON Condition |
|