Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2024 >> Soul GT Line >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (IVT Control System) >> Parking Sprag >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2025 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install in the reverse order of removal.
    NOTE:
    • Before mounting, replace the parking rod cam if there are excessive flaws on the outside of the parking rod cam (A).
      G00639731Courtesy of KIA MOTORS AMERICA, INC.
    • Make sure that there is an O-ring (A) on the side of the case
      G00639732Courtesy of KIA MOTORS AMERICA, INC.
    • Apply sealant on the IVT caseside (A).
      G00639733Courtesy of KIA MOTORS AMERICA, INC.
    • Check the IVT level after refilling the IVT with fluid

      Refer to REPLACEMENT