DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	Electrical check (open circuit)	Related fuse blown or missing Heater control circuit open or short Power supply circuit open or short Poor connection or damaged connector Faulty HO2S
Enable Conditions	Engine speed is higher than 32 RPM Battery voltage is higher than 10V and lower than 16V
Threshold Value	ECU power stage diagnosis output voltage is 2.218V to 2.842V
Diagnostic Time	Continuously (5.0s/recurrence 100 ms)
MIL ON Condition	2 driving cycles