Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (ECM/PCM↔ Chassis ground) |
|
G 1.6 T-GDI ECM connector | 3, 26, 60 (power) | Chassis ground | - | B+ |
| G 2.0 MPI NU PCM connector | 41, 75 (power) | Chassis ground | - | B+ | ||
| Open in Circuit Inspection (ECM/PCM ↔ Chassis ground) |
|
G 1.6 T-GDI ECM connector | 1, 2, 4 (ground) | Chassis ground | - | Approx. below 1Ω |
| G 2.0 MPI NU PCM connector | 1, 2, 4 (ground) | Chassis ground | - | Approx. below 1Ω | ||
Good
- Go to "P-CAN INSPECTION" procedure.
No Good
- Repair or replace as necessary and then go to "VERIFICATION OF REPAIR" procedure.