| DTC Strategy |
|
- Poor connector connection
- Faulty AWD
|
| Enable Condition |
- Normal 12V battery voltage
- Ignition "ON"
|
| Threshold Value |
Case 1 |
- * If the motor driver current is 30A or more (overcurrent)
|
| Case 2 |
* If the motor H-bridge circuit temperature is 150°C(302°F) or higher (overheat detection) |
| Case 3 |
In the event of an AWD ECU motor driver failure |
| Detecting Time |
Case 1 |
|
| Case 2 |
|
| Case 3 |
|
| Clear Condition |
Case 1 |
- When detecting a condition where the motor driver current is 26A or less
|
| Case 2 |
- When a motor H-bridge circuit temperature below 140°C(284°F) is detected
|
| Case 3 |
- Motor Driver IC self-diagnosis
|