Removal & Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the battery negative (-) terminal.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - " AIR CLEANER REMOVAL AND INSTALLATION ")
Disconnect the ETC module connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the ETC module (A) by removing the bolts.
Tightening torque:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.