Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Voltage inspection (AATS ↔ Chassis ground) |
|
AATS connector | 1 (signal) | Chassis ground | - | Approx. 2.63V |
| Voltage inspection (AATS ↔ Chassis ground) |
|
AATS connector | 1 (signal) | Chassis ground | - | Approx. 5V |
| Open in circuit inspection (AATS ↔ Chassis ground) |
|
AATS connector | 2 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "P-CAN INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, Go to "VERIFICATION OF REPAIR " procedure.