Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (E-Shifter ↔ Chassis ground) |
|
E-Shifter connector | 1, 2 (power) | Chassis ground | - | B+ |
| Open in circuit inspection (E-Shifter ↔ Chassis ground) |
|
E-Shifter connector | 20 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "P-CAN INSPECTION " procedure.
No Good
- Repair open or short in circuit and then Go to "VERIFICATION OF REPAIR " procedure.