DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN communication monitoring	Poor connection CAN communication circuit (open, short) CAN high line open CAN low line open CAN high line short to 12V battery CAN low line short to 12V battery CAN high, low line short to each other CAN high, low line short to each other and short to ground Terminating resistance fault Transmitting controller bus off Transmitting controller disconnected Transmitting controller power, fuse or ground fault Transmitting controller H/W, S/W fault CAN line noise VCU fault (CAN module fault) SCU fault (CAN module fault)
Enable Condition	Ignition "ON" 12V battery voltage is more than 9V No VCU timeout error No VCU Alive counter
Threshold Value	When normal VCU CRC value message is not received
Detecting Time	-
Fail Safe	Activate with PWM signal from VCU