DTC Information: DTC Detecting Condition

Item	Detecting Condition	Possible Cause
DTC Strategy	CAN communication monitoring	Poor connection CAN communication circuit (open, short) CAN high line open CAN low line open CAN high line short to 12V battery CAN low line short to 12V battery CAN high, low line short to each other CAN high, low line short to each other and short to ground Terminating resistance fault Transmitting controller bus off Transmitting controller disconnected Transmitting controller power, fuse or ground fault Transmitting controller H/W, S/W fault CAN line noise VCU fault (CAN module fault) SCU fault (CAN module fault)
Enable Condition	Ignition "ON" 12V battery voltage is more than 9V
Threshold Value	VCU CAN abnormal message is received
Detecting Time	2s
Fail Safe	Activate with PWM signal from VCU