Module Inspection
| Inspection Item | Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | |||
| Power inspection (SCU ↔ Chassis ground) |
|
SCU connector | 5, 12, 13, 14 (power) | Chassis ground | - | B+ |
| Open in circuit inspection (SCU ↔ Chassis ground) |
|
SCU connector | 6, 7 (ground) | Chassis ground | - | Approx. below 1Ω |
Good
- Go to "P1-CAN INSPECTION " procedure.
No Good
- Repair or replace as necessary and go to "VERIFICATION OF REPAIR " procedure.
- Repair open or short in circuit and then go to "VERIFICATION OF REPAIR " procedure.