Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2023 >> Telluride EX X-Line >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System Diagnosis >> DTC P1C2B-00: OPI Hall Sensor Error >> Wiring Inspection >> Circuit Inspection >> Inspection Item: Module Circuit Inspection

Inspection Item: Module Circuit Inspection

Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Disconnect the electrical connector(s) from the concerned component.
  2. Ignition "ON".
Electric oil pump unit connector 1 (Memory power) Chassis ground - B+
Electric oil pump unit connector 3 (ON/START Input) Chassis ground - B+
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
Electric oil pump unit connector 2 (ground) Chassis ground - Approx. below 1Ω

Good 

No Good