Repair Procedures: Installation

WARNING: This page is about a different variant/trim than selected.

NOTE:

Install the Engine Coolant Temperature Sensor (ECTS) with the specified torque.
If ECTS is dropped, it may cause internal damage. Do not use it.
Install the ECTS by pushing it into the installation hole firmly. and be careful not to damage the sensor.
Apply the engine coolant to the O-ring (A).

[ITM]

G14990774

Courtesy of KIA MOTORS AMERICA, INC.

[Water Pump]

G14990775

Courtesy of KIA MOTORS AMERICA, INC.

Install in the reverse order of removal.
Fill the engine cooling system with coolant.
(Refer to Engine Mechanical System - "ENGINE COOLANT ")