[Fuel Pump Motor]
- Turn the ignition switch OFF and Disconnect the battery negative (-) terminal.
- Remove the fuel pump assembly.
(Refer to Fuel Pump Module - "Removal ")
- Connect the fuel pump connector.
- Connect the battery negative (-) terminal.
- Activate the fuel pump by turning the ignition switch ON or starting the engine at no load condition.
CAUTION:
Make sure that the fuel outlet is directed toward the fuel tank
- Fuel pump overheating can cause the fuel pump failure. activating time should not exceed 3 seconds.
- Once the fuel pump activated, fuel may spread out to the vehicle side due to residual fuel.
Make sure that the fuel outlet is directed toward the fuel tank