Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the battery and battery tray.
(Refer to Engine Electrical System - "BATTERY ")
Disconnect the driven pulley speed sensor connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the driven pulley speed sensor (A) after loosening the bolt.
Tightening torque :

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.