General Inspection: Notes
- 12V battery terminal and fuse
- Loose or corrosion on 12V battery terminal cable.
- Testing continuity of fuse.
- Drive belt inspection
- Inspect for tear and abrasion.
- Adjust tension of the belt. (Refer to Appropriate Service Information - "DRIVE BELT TENSIONER ")
- Alternator noise and wiring harness inspection.
- Inspect for condition of wiring harness of alternator.
- Check for abnormal noise on alternator under engine operation.
- Is the measured value within specification?
Good
- Go to "CHARGING VOLTAGE INSPECTION " procedure.
No Good
- Repair as necessary and then Go to "VERIFICATION OF REPAIR " procedure.