Front Camera: Installation

WARNING:

When working on the high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or short circuit.
When working on the high voltage system or related components, be sure to observe and be aware of the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ". If not, it may cause serious accidents due to electric shock or short circuit.

Install in reverse order of removal.
NOTE: Fully install it so that you can hear a "click" sound when assembling it.
When replacing the front camera unit, perform the "Variant Coding" by using KDS.
(S/W Management → Front View Camera → Variant Coding)

Information

Refer to the KDS screen for operating conditions and details
Enter the specification value read from the existing camera into the new front camera.
Perform the front view camera unit calibration.
(Refer to Front View Camera - "ADJUSTMENT ")