Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2023 >> EV6 Light >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Electric Power Conversion System (4WD)) >> Battery Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • When working on high voltage system, the work should be performed by technicians who have completed the relevant training. A lack of understanding of the high voltage system can lead to serious accidents due to electric shock or electric leakage.
  • When working on high voltage system or related components, make sure that you are familiar and comply with the "HIGH VOLTAGE SYSTEM GENERAL SAFETY INFORMATION AND CAUTION ." If you do not comply with the instructions, serious accidents due to electric shock or leakage may occur.
  • When working on high voltage system, make sure to check the Personal Protective Equipment (PPE) and high voltage shut-off procedures.
  1. Install in the reverse order of removal.
    NOTE:
    • Install the battery sensor to the specified torque.
    • If the battery sensor is dropped, it may cause internal damage. (Do not reuse)
scientia non olet · About Mike's Workshop Manuals