Components Inspection
WARNING: This page is about a different car, the 2024 Kia Carnival. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the Engine Coolant Temperature Sensor (ECTS).
(Refer to Engine Coolant Temperature Sensor - "REMOVAL AND INSTALLATION ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between ECTS signal terminal and ground terminal.
- Check that the resistance is within the specification.
| Temperature | Resistance (kΩ) | |
|---|---|---|
| °C | °F | |
| -40 | -40 | 41.74 - 54.54 |
| -30 | -22 | 23.54 - 29.94 |
| -20 | -4 | 14.13 - 16.83 |
| -10 | 14 | 8.39 - 10.22 |
| 0 | 0 | 5.28 - 6.29 |
| 10 | 50 | 3.42 - 4.00 |
| 20 | 68 | 2.31 - 2.59 |
| 30 | 86 | 1.55 - 1.86 |
| 40 | 104 | 1.08 - 1.21 |
| 50 | 122 | 0.77 - 0.85 |
| 60 | 140 | 0.56 - 0.61 |
| 70 | 158 | 0.41 - 0.44 |
| 80 | 176 | 0.31 - 0.33 |
| 90 | 194 | 0.23 - 0.25 |
| 100 | 212 | 0.18 - 0.19 |
| 110 | 230 | 0.145 - 0.149 |
| 120 | 248 | 0.113 - 0.118 |
| 130 | 266 | 0.090 - 0.095 |
| 140 | 284 | 0.073 - 0.077 |
| 150 | 302 | 0.059 - 0.063 |