TCM adaptive values learning procedure

WARNING: This page is about a different variant/trim than selected.

Static relearn (condition: ATF temperature 40 - 100°C (104 - 212°F)

Step on the brake, and then pause for 3 seconds each on "N" range and "D" range.

Repeat the above procedure four times.

Courtesy of KIA MOTORS AMERICA, INC.

Drive the vehicle through all the gears. (1st → 2nd → 3rd → 4th → 5th → 6th)
NOTE: Keep the throttle position (15 - 25%) steady while driving the vehicle.
Decelerate the vehicle by stepping on the brake (6th → 5th → 4th → 3rd → 2nd → 1st).
Repeat the above procedure four times.