Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative (-) battery terminal.
(Refer to Engine Electrical System - "AUXILIARY BATTERY ")
Remove the air intake hose (A).

Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the Boost Pressure Sensor (BPS) connector (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the Electronic Throttle Control (ETC) module (A) after removing the mounting bolts.
Tightening torque:

9.8-11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.