Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2022 >> Sorento X-Line EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 180 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Adjustment

Repair Procedures: Adjustment

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Must perform the Electronic Throttle Control (ETC) learning procedure after replacing or reinstalling the ETC.
  • If not performing the ETC learning procedure after replacing or re-installing, MIL or DTCs might occur.
  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Waif for 1 minute with the ignition switch OFF.
  4. Restart the engine, check that the idle speed is stable.
scientia non olet · About Mike's Workshop Manuals