Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2022 >> Sorento EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 187 (Engine Control System (PHEV)) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Inspection >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.

Throttle Position Sensor (TPS)

  1. Connect the KDS on the Data Link Connector (DLC).
  2. Start the engine and measure the output voltage of Throttle Position Sensor (TPS) 1 and 2 at C.T. and W.O.T.

    Specification:  Refer to SPECIFICATION 

ETC Motor 

  1. Measure resistance between the Electronic Throttle Control (ETC) module terminals 1 and 2 after disconnecting the connector.

    Specification:  Refer to SPECIFICATION 

scientia non olet · About Mike's Workshop Manuals