Front Door Lock Module
- Disconnect the battery negative (-) terminal and the service interlock connector.
(Refer to REMOVAL & INSTALLATION - 2WD
(Refer to REMOVAL & INSTALLATION - 4WD
- Remove the front door module.
(Refer to Body - "FRONT DOOR MODULE ")
- Disconnect the connector from the door lock actuator.
[Central Lock/Dead Lock]
CENTRAL LOCK/DEAD LOCK - TERMINAL FUNCTION DESCRIPTIONTerminal Function LH RH 1 - M3 2 - M2 3 COM M1 4 Lock/Unlock switch Switch (AJAR) 5 Switch (AJAR) Lock/Unlock switch 6 M1 COM 7 M2 - 8 M3 - - Check actuator operation by connecting power and ground as shown in the table below.
[Central Lock]
[LH]
CENTRAL LOCK - TERMINAL FUNCTION DESCRIPTION
| Terminal | Function | |
|---|---|---|
| Central Lock | Central Unlock | |
| 8 | - | + |
| 7 | + | - |
| 3 - 4 | ON → OFF | OFF → ON |
| 3 - 5 | Door open & half latching: ON Full latching: OFF |
|
[RH]
CENTRAL LOCK - TERMINAL FUNCTION DESCRIPTION
| Terminal | Function | |
|---|---|---|
| Central Lock | Central Unlock | |
| 1 | + | - |
| 2 | - | + |
| 6 - 5 | ON → OFF | OFF → ON |
| 6 - 4 | Door open & half latching: ON Full latching: OFF |
|
[Dead Lock]
[LH]
DEAD LOCK - TERMINAL FUNCTION DESCRIPTION
| Terminal | Function | |
|---|---|---|
| LockDead | UnlockDead | |
| 8 | - | + |
| 7 | - | + |
| 6 | + | - |
[RH]
DEAD LOCK - TERMINAL FUNCTION DESCRIPTION
| Terminal | Function | |
|---|---|---|
| LockDaed | UnlockDead | |
| 1 | - | + |
| 2 | - | + |
| 4 | + | - |