Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2021 >> Telluride LX, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Diagnosis >> DTC P1C2B-00: OPI Hall Sensor Error >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor "Diagnostic Trouble Codes (DTC)" with KDS.
 Figure 1 below
G13337924Courtesy of KIA MOTORS AMERICA, INC.

Active Fault 

History/Pending Fault 

scientia non olet · About Mike's Workshop Manuals