Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2021 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> Suspension >> Suspension Control Systems >> Electronic Control Suspension (ECS) System >> ECS Control Unit >> Repair Procedures >> Removal

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the luggage side trim.

    (Refer to Body - "LUGGAGE SIDE TRIM ")

  3. Disconnect the ECS control unit connector (A).
    G13424512Courtesy of KIA MOTORS AMERICA, INC.
  4. Loosen the ECS control unit bracket nut and then remove the ECS control unit (A).
    G13424513Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals