Reproducing Motion

1. If the reproduction CAN data is received from DDM, the buzzer is issued one time and the seat is automatically moved to the memorized position.
2. The CAN data not memorized does not perform reproduction function.
3. If CAN data is newly received during previous data reproduction, the final data takes precedence.
4. If the reproduction CAN data is received by pressing button 1 or 2 during reproduction, the seat stops the reproduction process.
5. If the memorized CAN data is received by pressing SET button during reproduction, the seat stops the reproduction process.
   NOTE: Press the SET button once more to store the position of stop.
6. Automatically stop when remart switch is OFF during reproduction.
7. Do not operate the motor when the difference between the memorized position for reproduction and current position is less than 4 pulses.

Conditions for Prohibiting the Reproduction 

In case any of the following conditions is met, the reproduction is prohibited and the controlling stops during reproduction.

1. IGN2 OFF (Excluding within 30 seconds after door opening or closing.)
2. Higher than 3 km/h of vehicle speed
3. When the switch is controlled manually
4. Operation time chart

   Courtesy of KIA MOTORS AMERICA, INC.