| DTC Strategy |
- Response time monitor (lean to rich)
|
- Poor connector connection
- HO2S (Bank 1, Sensor 2)
- ECM
|
| Enable Conditions |
- Battery voltage is greater than 10.7V
- Engine speed is between 1200 and 3520 RPM
- EGT around ROS (model) is greater than 425°C (797°F)
- Exhaust gas mass flow 22kg/h
- Change amount of exhaust gas mass flow is between -30 and 50kg/h
- Fuel system status is fuel cut-in
- ROS voltage is greater than 0.63V (before fuel cut-in)
|
| Threshold Value |
- Response time is greater than threshold
|
| Diagnostic Time |
- 2 valid fuel cut-in phases (once per driving cycle)
|
| MIL ON Condition |
|