| DTC Strategy |
Case 1 |
- Monitor the duty control for ITM
|
- Poor connector connection
- Faulty ITM control circuit
- Faulty ITM
|
| Case 2 |
- Monitor the current feedback for ITM
|
| Case 3 |
- Monitor the deviation between target position and actual position
|
| Enable Conditions |
Case 1 |
- No DTC of P26A500, P26A600, P26A700, U063F00
- ITM position (0° to 265°)
- Deviation between target ITM position and the actual ITM position is more than 1.5°
|
| Case 2 |
- No DTC of P26A500, P26A600, P26A700, U063F00
- Deviation between target position and actual position is less than specified value and faulty duty control for ITM
- Ignition "ON"
|
| Case 3 |
- ITM position (0° to 265°)
- Deviation between target ITM position and the actual ITM position is more than 0.5°
- Duty control ITM is higher than 0%
|
| Threshold Value |
Case 1 |
- Duty control ITM is higher than 40%
|
| Case 2 |
- The current feedback of ITM is higher than 2.5A
|
| Case 3 |
- Deviation between target ITM position and the actual ITM position is more than 10°
|
| Diagnostic Time |
Case 1 |
|
| Case 2 |
|
| Case 3 |
|
| MIL ON Condition |
|