Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2021 >> K5 GT-Line, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Diagnosis - 1.6L (7 Of 7) >> DTC P2B5D-00: Engine Coolant Flow Control Valve Position Sensor Circuit >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

G13809993Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON".
TMM motor connector 1 (motor +) Chassis ground - Approx. 0V
TMM motor connector 2 (motor -) Chassis ground - Approx. 0V
TMM motor connector 3 (power) Chassis ground - Approx. 5V
TMM motor connector 5 (ground) Chassis ground - Approx. 0V
TMM motor connector 4 (signal) Chassis ground - Approx. 4V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
TMM motor connector 1 (motor +) ECM connector 2 (motor +) Approx. below 1Ω
TMM motor connector 2 (motor -) ECM connector 3 (motor -) Approx. below 1Ω
TMM motor connector 3 (power) ECM connector 9 (power) Approx. below 1Ω
TMM motor connector 5 (ground) ECM connector 35 (ground) Approx. below 1Ω
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
TMM motor connector 1 (motor +) Chassis ground - ∞ (infinity)Ω
TMM motor connector 2 (motor -) Chassis ground - ∞ (infinity)Ω
TMM motor connector 4 (signal) Chassis ground - ∞ (infinity)Ω

Good 

No Good