Repair Procedures: Removal: Intake
WARNING: This page is about a different variant/trim than selected.
- Disconnect the battery negative (-) terminal.
- Remove the engine cover.
- Disconnect the Camshaft Position Sensor (CMPS) connector (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the CMPS (A) after removing the mounting bolt.
Tightening torque:
9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)
 Courtesy of KIA MOTORS AMERICA, INC.
|