Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2021 >> Forte GT Line >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Control System - 1.6L) >> Ambient Temperature Sensor (ATS) >> Repair Procedures >> Removal & Installation

Removal & Installation

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery (-) terminal.
  2. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the connector and then remove the ambient temperature sensor (A).
    G13303799Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.
    NOTE: Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
scientia non olet · About Mike's Workshop Manuals