Removal And Installation
WARNING: This page is about a different car, the 2024 Kia Forte. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
- Disconnect the CVVT oil control valve connector.
- Remove the valves (A) by loosening the mounting bolt.
CVVT oil control valve mounting bolt:
9.8 - 11.8 Nm (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)
[Bank 1/Intake]
[Bank 1/Exhaust]
- Install in the reverse order of removal.
NOTE:
- Install the Oil Control Valve (OCV) with the specified torques.
- If the OCV is dropped, it may cause internal damage. (Do not reuse)
- Apply engine oil to the valve O-ring.