| DTC Strategy |
- Pressure sensor signal monitoring
|
- Electrical noise signal
- Abnormal pressure value due to residual air in brake system
- Faulty pressure sensor (built in HECU)
|
| Enable Condition |
- Ignition "ON"
- No related DTC is stored
|
| Threshold Value |
* If the signal is within ± 15 bar, pressure offset correction
- When the pressure sensor pressure is above the specified value
- When the T1/T2 signal is not valid
- When the pressure sensor signal is not received for more than 70 ms
- When the P1/P2 signal is not valid
- When the pressure sensor signal has noise
|
| Warning Lamp |
|
| Disable Condition |
- Normal signal is received after ignition "OFF/ON"
|