Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Stinger GT2, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Airbag Modules And Clock Spring) >> Knee Airbag (KAB) Module >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal, and wait for at least three minutes before beginning to work.
  2. Install in the reverse order of removal.
  3. Reconnect the negative battery cable.
  4. After installing the knee airbag (KAB), confirm proper system operation.
    • Switch "ON" the ignition. The SRS indicator light should turn on for about six seconds and then off.
scientia non olet · About Mike's Workshop Manuals