Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Stinger GT-Line, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Smart Key System) >> Smart Key Unit >> Repair Procedures >> Removal >> Interior 2 Antenna

Interior 2 Antenna

WARNING: This page is about a different car, the 2019 Kia Stinger. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative (-) battery terminal.
  2. Remove the floor console assembly.

    (Refer to Body - " FLOOR CONSOLE ASSEMBLY  ") 

  3. Remove the interior 2 antenna (A) after disconnecting the connector and loosening the mounting nuts.
    G12798840Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals