Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Supplemental Restraint System Control Module (SRSCM) And Sensors) >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector(s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least thirty seconds before beginning to work.
  2. Remove the front impact sensor mounting bolt (A).
    G12858618Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the front impact sensor connector.
scientia non olet · About Mike's Workshop Manuals