Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Control System - 3.3L) >> Intake Air Temperature Sensor (IATS) >> Repair Procedures >> Installation

Repair Procedures: Installation

WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Install the component to the specified torque.
  • Note that internal damage may occur if the component is dropped. In this case, inspect the component before installation.
  • Insert the sensor in the installation hole and be careful not to damage it during installation.
  1. Install in the reverse order of removal.
scientia non olet · About Mike's Workshop Manuals