Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Sorento L >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Engine Control System - 3.3L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2019 Kia Sorento. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the negative (-) battery terminal.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the upper mounting cap (B), and then remove the mounting nut (C).
  4. Remove the lower mounting cap (D), and then remove the mounting nut (E).
G12885634Courtesy of KIA MOTORS AMERICA, INC.
G12885635Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals