Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Optima Plug-In Hybrid EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (HEV)) >> Crankshaft Position Sensor (CKPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the engine room under cover.

    (Refer to Engine Mechanical System - "ENGINE ROOM UNDER COVER ")

  3. Disconnect the crankshaft position sensor connector (A) and remove the sensor (B) after removing the installation bolt.
    G13388065Courtesy of KIA MOTORS AMERICA, INC.
G13388066Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals