Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Optima LX >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Occupant Classification System Diagnosis) >> DTC B1763-00: OCS ECU Defect >> Component Inspection >> Zero Re-Calibration Of Occupant Classification Sensor

Zero Re-Calibration Of Occupant Classification Sensor

WARNING: This page is about a different car, the 2020 Hyundai Kona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and connect the GDS.
  2. Turn the ignition switch ON & Engine OFF. Then, select "Vehicle S/W Management" mode on the GDS.
  3. Select "Zero Re-Calibration of Occupant Classification Sensor".
    G12601354Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About Mike's Workshop Manuals