Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Kia >> 2020 >> Optima EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Control System - 2.0L (Except HEV)) >> RCV Control Solenoid Valve >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the RCV control solenoid valve after disconnect the connector (A), bolt (B) and RCV hoses (C).
G12922400Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About Mike's Workshop Manuals